Description
The Anycubic Kobra S1 is a fully enclosed CoreXY FDM 3D printer designed for fast, precise and reliable printing. With a 250 × 250 × 250mm build volume, print speeds of up to 600mm/s, a 320°C hotend and a heated PEI spring steel build plate, it provides the flexibility to work with a wide range of commonly used 3D printing materials.
Powered by Kobra OS, the Kobra S1 combines high-speed CoreXY motion with automatic bed levelling, intelligent print monitoring and remote connectivity. Built-in features such as AI Spaghetti Detection, filament runout detection, filament entanglement detection and power-loss recovery help protect longer print jobs.
Fast, enclosed CoreXY printing
- Fully enclosed CoreXY design
- 250 × 250 × 250mm build volume
- Recommended print speed of 300mm/s
- Maximum print speed of up to 600mm/s
- Up to 20,000mm/s² acceleration
- Linear rod motion system for X and Y axes
- Kobra OS firmware
- Pressure advance and flow calibration
High-temperature printing
The Kobra S1 features a 320°C maximum nozzle temperature and a heated bed capable of reaching 120°C, allowing it to work with a range of materials without requiring immediate hardware upgrades.
Supported materials include PLA, PETG, TPU, ABS and ASA. The standard 0.4mm nozzle can also be replaced with compatible 0.6mm or 0.8mm nozzles, providing additional flexibility between detail and print throughput.
Intelligent print protection
The Kobra S1 is designed to reduce the need for constant supervision. AI Spaghetti Detection can identify failed prints, while filament runout and filament entanglement detection help prevent common causes of failed jobs.
Power-loss recovery allows interrupted prints to resume after an unexpected outage, helping protect long-running projects.
The LeviQ3.0 automatic levelling system and Z-offset adjustment also help maintain consistent first layers without requiring extensive manual calibration.
Remote monitoring and control
A built-in HD camera with 480P monitoring allows you to check your prints remotely through the Anycubic App over Wi-Fi.
The 4.3-inch capacitive touchscreen provides direct control from the printer, while USB connectivity and compatible slicing software provide additional ways to send and manage print jobs.
Quiet enough for overnight printing
The Kobra S1 is designed with noise reduction in mind, operating at up to 46dB in Standard mode and as low as 44dB in Quiet mode. This makes it better suited to home workshops, offices and environments where keeping noise under control matters.
